Using The Supplied Usb Connection Kit; Installing Usb Driver; Connecting Computer And Palmcorder - Panasonic Palmcorder Multicam PV-DC152 Operating Instructions Manual

VFA0366
LSFT0489
1
1
4
2)
2
46

Using the Supplied USB Connection Kit

(PV-DC252/PV-DC252-K)
ª Operating environment
USB Driver can be installed in a PC/AT compatible personal computer
which can run Microsoft Windows
Windows
≥USB Driver
For Windows
≥IBM PC/AT or compatible
≥Intel Pentium ll Processor: 300 MHz or higher CPU recommended
≥Microsoft Windows
Professional pre-installed PC with USB port
≥Video card that supports16 bit color at 800k600 monitor resolution
≥RAM: 64 MB or more
≥2 MB minimum available hard disk space
≥Disk drive: CD-ROM drive
≥Ports: USB Terminal
≥Other requirements: Mouse or other pointing device
~~~~~~~~~~~~~~~~~~~~~~~~

Installing USB Driver

In order for USB Driver to be installed, the hard disk must have at least 2 MB
of free space. Before proceeding with installation, check out the amount of
free space on the hard disk.
1
2
3
4
≥If you no longer need the driver, see page 51.
≥Update the driver after upgrading the OS.
~~~~~~~~~~~~~~~~~~~~~~~~

Connecting Computer and Palmcorder

Install USB Driver (above) before connecting.
Before making these connections, turn off all devices which are to be
connected.
1
2
4)
3
1) Palmcorder
3
2) USB Connection Cable
3) USB terminal
4) Personal computer (not supplied)
≥After making the connections, turn the connected equipment on.
≥Appropriate driver to recognize Palmcorder is automatically installed by
1)
Windows Plug'n Play when connected for the first time.
≥When using the USB Connection Kit, use of the AC Adaptor is
TO PC
recommended to use as the power supply of the Palmcorder.
3)
≥After the USB Driver is installed and USB Connection Cable is connected to
the Palmcorder, open [My computer] or [Windows Explorer] to check the
drive is displayed as a removable disk drive (only when card is inserted into
the Palmcorder). It enables you to operate like a floppy disk drive, and you
can use the same drag and drop or copy methods.
®
2000 Professional.
®
®
XP, Windows
Insert supplied CD-ROM into the CD-ROM drive.
1
≥[Setup Menu]
appears.
Select the software to be installed from [Setup Menu].
≥The set up program starts running.
Finish installation by following the on-screen instructions.
≥Carefully read the license agreement on the window, and if you agree
click [Yes]. Software is not installed if [No] is clicked.
Click [OK] when the [Restarting Windows] Dialog appears.
≥Reboot the computer to finish installing USB driver.
≥Installation continues after the computer reboots if you selected
additional software.
Install the supplied USB Driver. (above)
Insert memory card into Palmcorder, then set card playback
mode.
Use auxiliary USB Connection Cable to connect.
≥PC connecting mode.
® ®
XP, Windows Me, Windows
® ®
Me, Windows 98SE, Windows
®
98SE,
®
2000