Panasonic SV-AV50S Operating Instructions Manual page 61

≥Do not use the personal computer
(Explorer) to format it. Otherwise, it may
not be recognized by the SD Video
Camera.
≥If the write protection switch of the SD
Memory Card is set to [LOCK], data
cannot be erased.
≥When the Memory Card is formatted, the
files will be deleted, even if files are
locked.
≥As formatting erases all the data, save the
necessary data on a personal computer,
etc. beforehand.
≥Formatting may take a little time. Wait until
the Power/Card Access Lamp stopped
flash.
≥While formatting a card, you should not
remove the Memory Card or turn off the
power. The card may be damaged.
ª Playing Back on an external
device (l 39)
≥When connecting, turn the power off.
≥To cause the display on the screen to
disappear, set [Icon display] in the
[Display setup] menu to [Off].
≥To view pictures on the LCD monitor of the
SD Video Camera fitted on the USB
Cradle, set [Output select] to [LCD]. (The
sound is also heard from the speaker of
the SD Video Camera.) If [Output select] is
set to [Line], pictures cannot be displayed on
the LCD monitor.
≥When the USB Cradle is not fitted to the
SD Video Camera, pictures appear on the
LCD monitor regardless of the setting on
the menu.
≥If the camera is connected to an external
device, such as a TV and it outputs video
and audio to the device, the sound is not
heard from the speaker of this camera
even with [Beep] in the menu set to [On].
≥Part of the characters may be clipped on
the screen, depending on the type of TV.
ª Installing SD-MovieStage Ver.2.5
(l 44)
≥If you failed to install DirectX 9.0b when
installing SD-MovieStage Ver.2.5, click
[DirectX] on the installation screen or
double-click [dxsetup.exe] in [DirectX90b]
on the CD-ROM (supplied) and follow the
instructions on the screen to install
DirectX 9.0b.
ª Connecting to the PC (l 46)
≥To erase pictures that you recorded on the
Memory Card by using the SD Video
Camera, be sure to erase them on the SD
Video Camera or SD-MovieStage Ver.2.5,
not on a personal computer (the Explorer,
etc.).
≥You may not be able to properly play back
on the SD Video Camera after editing the
recorded data or changing the image data
on a personal computer.
≥Moving Picture format (MPEG4) that can
be played back on the SD Video Camera
is ASF. (Depending on the file, it may not
be able to be played back even if it is in
ASF format.)
≥When you operate the SD Video Camera
using its buttons, pull out the USB cable.
(The SD Video Camera cannot be
operated in the [PC accessing] mode.)
≥When you play back MPEG4 moving
picture file in the card on a personal
computer while the SD Video Camera and
the personal computer is connected, the
frame of the picture may be dropped. In
this case, copy the desired file to the
personal computer and play it back.
≥Use only the supplied USB cable.
≥Do not remove the AC adaptor when the
SD Video Camera is connected to the
personal computer.
≥If the SD Video Camera's personal
computer peripheral mode
([PC accessing] is displayed) is not
cancelled when the personal computer is
turned off, remove the USB cable.
61