Epson EMP-74 User Manual page 74

Problem Solving
Status
High-speed cooling in progress
Orange
TIP
• If the projector is not operating properly even though the indicators are all showing normal, refer to "When the Indicators Provide No Help"
on the following page.
• If an indicator is showing a status which does not appear in the previous tables, contact your dealer or the nearest address provided at
"International Warranty Conditions" in Safety Instructions/World-Wide Warranty Terms booklet.
Cause
(This is not an abnormality, but if the temperature rises too high again, projection will stop
automatically.)
•Check that the air filters and air exhaust vent are clear and that they are not up against a surface
such as a wall.
•If the air filters are blocked, clean or replace them.
Remedy or Status
p.15
: lit : flashing
p.83, p.89
73