Epson EMP-74 User Manual page 53

Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
Color Corrects the vividness of the image colour. The settings can
Mode be saved separately for each type of source (computer or
video source). You can select from six different quality
settings depending on the surroundings.
•Dynamic : Brightness is emphasised, so that images are
fresher and have greater modulation than in
Presentation mode.
•Presentation : Brightness is emphasised to produce images
that are ideal for presentations.
•Theatre : Images are optimised using natural tints. It
emphasises colour gradations (differences
between light and dark) when projecting
images that are very dark or very light and
bright, to make such images easier to see.
•Living Room: Brightness is emphasised to produce images
that are ideal for projecting TV images, etc.
in bright rooms.
•sRGB : Images conform to the sRGB standard.
If set to "sRGB", the
the "Color Adjustment" command in the
"Advanced" menu will be set to 6500K.
•Blackboard : Images with natural tints can be obtained
when projecting onto a blackboard (green).
Input Selects the input signal in accordance with the source being
Signal used.
The default setting varies according to the signal input
source.
If signals from the [Computer1/Component Video1] port are
being input: Computer1
If signals from the [Computer2/Component Video2] port are
being input: Computer2
•When projecting computer or RGB video images, select
"Computer1" or "Computer2".
Auto Setup Selects whether the automatic adjustment function for
automatically optimising images when the input source is
changed is turned "ON" or "OFF".
Function
Abs. Color Temp. for
52
Default
Presentation
Depends on
input source
ON