Epson EMP EMP-81 User Manual page 77

Problems Solving
Projection stops automatically
Check
Is "Sleep Mode" set to "ON"?
The message "Not Supported." is displayed
Check
Are the image signal format settings correct? If a
Only when projecting images
from a video source
Does the mode match the frequency and
resolution of the image signals?
Only when projecting computer images
When the "Sleep Mode" menu command has been set to "ON", the lamp turns off automatically if
no operations are carried out for about 30 minutes while no video signal is being input. The Power
indicator will flash orange at this time. Press the [Power] button to turn the power on. If you do not
want sleep mode to be used, change the "Sleep Mode" setting to "OFF".
"Extended" - "Operation" - "Sleep Mode"
composite videog or S-Videog
menu command to select the signal format.
sp.57
"Signal" - "Video Signal"
Refer to the documentation provided with your computer for details on changing the resolution and
frequency of the image signals being output from the computer.
"List of Supported Monitor Displays"
Remedy
sp.62
Remedy
source is connected to the projector, use the "Video Signal"
sp.99
76