Epson EMP EMP-81 User Manual page 58

Using the Configuration Menu Functions
Component videog
Composite videog/ S-Videog
Sub-menu
Position Moves the image display position vertically and horizontally.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the adjustment
using the display position adjustment screen that appears.
Computer1 (Adjustment is only possible when component video signals
Input are being input.)
Selects the input signal in accordance with the equipment
that is connected to the [Computer1/Component Video1]
port.
If set to "Auto" the input signal is set automatically in
accordance with the connected equipment.
If you select "Auto", and the colours appear unnatural, select
"Component Video1".
Computer2 (Adjustment is only possible when component video signals
Input are being input.)
Selects the input signal in accordance with the equipment
that is connected to the [Computer2/Component Video2]
port.
If set to "Auto" the input signal is set automatically in
accordance with the connected equipment.
If you select "Auto", and the colours appear unnatural, select
"Component Video2".
Video (Adjustment is only possible when composite video/S-Video
Signal signals are being input.)
Sets the video signal format.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the selection from
the video signal format selection menu that appears.
•When set to "Auto", the video signal format is set
automatically.
Resize Sets the aspect ratio for projected images.
Function
57
Default
Depends on
connection
Auto
Auto
Auto
Depends on
connection