Using The Remote Control And Remote Operating Range; Using The Remote Control - Epson EMP EMP-81 User Manual

Before Using the Remote Control
Using the Remote Control and Remote Operating
Range

Using the Remote Control

The remote control is used in the following way.
PROCEDURE
Point the remote control light-emitting area toward one of
the remote control light-receiving areas on the projector
and operate the remote control buttons.
Remote control
light-receiving
area (front)
Remote control Remote control
light-emitting area light-receiving
area (back)
TIP
• Do not allow sunlight or light from fluorescent lamps to shine
directly onto the projector's remote control light-receiving areas,
otherwise it may interfere with the reception of signals from the
remote control.
• If delays in the responsiveness of the remote control occur or if it
does not operate after it has been used for some time, it probably
means that the batteries are getting flat. If this happens, replace the
sp.12
batteries with new ones.
• If any of the buttons on the remote control are pressed down for
more than 30 seconds, the remote control stops to send signals
(remote control's sleep mode) . The purpose of this is to prevent the
batteries from being consumed due to something being placed on top
of the remote control.
When the button is released, normal remote control operation will
resume.
13