Before Using The Remote Control; Inserting The Batteries - Epson EMP EMP-81 User Manual

Before Using the Remote Control

Inserting the Batteries

The batteries are not already inserted into the remote control at the time the
projector is purchased. You will need to insert the batteries that are
provided with the projector before the remote control can be used.
CAUTION
Be sure to read the Safety Instructions/World-Wide Warranty Terms
before handling the batteries.
PROCEDURE
Remove the battery cover.
1
While pushing the catch of the battery compartment cover, lift
the cover up.
Catch
Insert the batteries.
2
Check the positions of the (+) and (–) marks inside the battery
holder to ensure that the batteries are inserted the correct way.
Replace the battery cover.
3
Press the battery compartment cover until it clicks into place.
TIP
If delays in the responsiveness of the remote control occur or if it does
not operate after it has been used for some time, it probably means
that the batteries are becoming flat. Have two spare AAA-size alkali
batteries ready to use when required.
12