Extended" Menu - Epson EMP EMP-81 User Manual

Using the Configuration Menu Functions

"Extended" Menu

• The "User's Logo" setting can not be adjusted if no
signals are being input.
Sub-menu
Display This lets you make settings related to the projector's display.
Message:
Sets whether display of the following messages is turned
"ON" or "OFF".
• Signal name when the video signal is switched
• Colour mode name when the colour mode is switched
• When no image signals are being input
• When an incompatible signal is input
• When the air filter needs replacing
Background Color:
Sets the screen status when the [A/V Mute] button on the
remote control is being pressed or when no image signals
are being input to "Black", "Blue" or "Logo".
• To change the user's logo, you need to record your own
sp.90
logo.
• If the "User's Logo Protect" function of Password Protect
has been set to "ON", the "Logo" setting cannot be
changed from "Logo" to "Black" or "Blue", or from
"Black" or "Blue" to "Logo". Cancel the Password
Protect function before changing these settings.
Startup Screen:
Sets whether the startup screen is displayed or not.
To change the user's logo, you need to record your own
sp.90
user's logo.
This cannot be changed from enabled ("ON") to disabled
("OFF") if the "User's Logo Protect" function of Password
Protect has been set to "ON". Cancel the Password Protect
function before changing the setting.
User's Records a user's logo.
Logo •Press the [Enter] button on the remote control or on the
projector's control panel and then follow the instructions
that appear on the screen.
•A user's logo cannot be recorded if the "User's Logo
Protect" function of Password Protect has been set to "ON".
Cancel the Password Protect function before recording a
sp.29
user's logo.
Function
sp.29
sp.29
sp.90
61
Default
Message: ON
Background
Color:
Blue
Startup Screen:
ON
EPSON logo