42
Installation Guide
8.
Define the DNS information.
Execute the following commands, where:
—
XXX represents IP address information.
—
domain represents the domain name provided by the system administrator.
setNetworkDnsDomainName domain
setNetworkDnsAddressList XXX.XXX.XXX.XXX
If no DNS server is available, or if you prefer not to use the DNS server, execute the
following commands, where:
—
XXX represents IP address information.
—
*name represents the name provided by the system administrator.
—
domain represents the domain name provided by the system administrator.
setSystemHostsFileEntry quorumservername XXX.XXX.XXX.XXX domain
setSystemHostsFileEntry node1name XXX.XXX.XXX.XXX domain
setSystemHostsFileEntry node2name XXX.XXX.XXX.XXX domain
9.
To log out of the system, execute:
exit
Repeat these steps on each NAS server.