Scanning A Document Using The Wia Driver; Wia Compliant; Scanning A Document Into The Computer - Brother MFC-J4410DW Software User's Manual

Scanning

Scanning a document using the WIA driver

WIA compliant

®
For Windows XP/Windows Vista
scanning images. You can scan images directly into the PaperPort™ 12SE viewer that Brother included with
your machine or you can scan images directly into any other applications that support WIA or TWAIN
scanning.

Scanning a document into the computer

There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the
Flatbed scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using
the scanner glass (Flatbed). (See Pre-Scanning and cropping a portion using the scanner glass on page 47.)
a
Load your document.
b
Start the Nuance™ PaperPort™ 12SE software that was installed during the MFL-Pro Suite installation
to scan a document.
NOTE
• Depending on your model Nuance™ PaperPort™ 12SE may not be included. If it is not included, please
use other software applications that support scanning.
• The instructions for scanning in this guide are based on Nuance™ PaperPort™ 12SE. The process will
vary when scanning from other applications.
c
Click Scan Settings from the Desktop tab on the ribbon.
The Scan or Get Photo panel appears on the left side of the screen.
d
Click Select.
e
Choose WIA:Brother MFC-XXXX or WIA:Brother MFC-XXXX LAN from the Available Scanners list.
(Where XXXX is your model name.)
NOTE
If you choose TW-Brother MFC-XXXX, the TWAIN driver will start.
f
Check the Display scanner dialog box on the Scan or Get Photo panel.
g
Click Scan.
The Scan dialog box appears.
® ®
/Windows 7 you can choose Windows
®
Imaging Acquisition (WIA) when
2
2 2
2
45