Epson EMP 810 Network Installation Manual page 18

Choose Security Settings
1. Select the security mode you want to use for the Ad Hoc wireless network.
Note:
If you don't want to enable security for your Ad Hoc network, select None, then
press OK.
2. Do one of the following:
■
If you selected
Settings and Connect to the Network" on page 20.
■
If you selected WEP as the security mode, continue with step 3.
3. Create a WEP key for the Ad Hoc network. The WEP key can be in
alphanumeric (ASCII) format (recommended) or hexadecimal format.
Note:
The number of characters in your WEP key depends on the type of security mode
you choose and whether it's alphanumeric (ASCII) or hexadecimal:
Security mode
WEP–64 bit
WEP–128 bit
4. Select
Alphanumeric
your WEP key is in hexadecimal format.
18
Wireless Network Installation
as the security mode, continue with "Confirm Your
None
Alphanumeric (ASCII)
5 characters
13 characters
if your WEP key is ASCII, or select
Hexadecimal
10 characters
26 characters
Hexadecimal
if