Epson EMP 810 Network Installation Manual page 13

Select WEP Security Settings
1. Press u or d to select
Hexadecimal
Note:
If the WEP key is 5 or 13 characters, it's ASCII. If the WEP key is 10 or 26
characters, it's hexadecimal.
2. Use the arrow buttons on the printer's control panel to enter your WEP key.
Important:
WEP keys in ASCII format are case-sensitive. Be sure to enter upper- or lowercase
letters as necessary.
■
Press
Menu
x
numeric/special (
■
Press u or d until you see the character you want.
■
Press l or r to move the cursor.
■
Press to delete a character.
–
3. When you're done entering the WEP key, press
4. Continue with the next section.
Alphanumeric
if your WEP key is in hexadecimal format.
to switch between uppercase (
) characters.
123
Press the
uppercase, lowercase, or numeric/special characters.
Indicates current selection: ABC, abc, or 123.
if your WEP key is ASCII, or select
), lowercase (
ABC
Menu button to switch between
x
To enter a character:
Press u or d to select a character.
Press l or r to move the cursor.
Press – to delete a character.
.
OK
Wireless Network Installation
), or
abc
13