Epson EMP 810 Network Installation Manual page 31

Epson all-in-one printer network installation guide
Hide thumbs Also See for EMP 810:
Table of Contents

Advertisement

If you connected the printer wirelessly, verify that the printer is turned on
and the
setup using the printer's control panel
If you connected the printer to your network with an Ethernet network
cable, verify that the printer is turned on and connected to your network.
Select
Wired Network (Ethernet) setup
If you created an Ad-Hoc wireless connection, do one of the following:
For Windows users:
with an Ethernet cable, disconnect it. When setup is complete,
reconnect your computer's Ethernet cable.
For Macintosh users:
with an Ethernet cable, you cannot set up your printer this way. See
page 4 or page 21 to set up your printer.
If you're switching from a wireless to a wired network connection, you
need to disable the wireless adapter using the printer's control panel. Press
the
Setup
>
Wireless LAN Setup
Select
Yes
2. Continue clicking
printer. Then continue with step 9 on page 24.
Software installation failed
Make sure that the printer is connected to your network (see page 4 for wireless or
page 21 for Ethernet). Then remove and reinsert the CD to reinstall the printer
software.
Cannot communicate on a wired LAN
If you're switching from a wireless to a wired network connection, you need to
disable the wireless adapter using the printer's control panel. Press the
button on the printer's control panel, select
>
Setup
Advanced Setup
The printer does not appear in the Add Printer window (Mac OS X)
Make sure the printer driver was installed correctly and that your computer's
TCP/IP settings are configured correctly.
WiFi icon appears on the printer's control panel. Select
If your computer is connected to a network
button on the printer's control panel, select
>
Advanced Setup
, then press
.
OK
until EpsonNet Setup begins to search for your
Next
>
Disable Wireless LAN
, then click
, then click
If your computer is connected to a network
Network Settings
. Select
.
Next
.
Next
Network Settings
>
Disable Wireless LAN
Setup
>
Wireless LAN
, then press
Yes
Troubleshooting
Wi-Fi
.
.
OK
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents