Epson EB 1735W User Manual page 87

Saving a User's Logo
D
Move the box to select the part of the image to use
as the user's logo.
Using the remote control
q
You can save at up to 400
Using the control panel
^ 300 dots in size.
E
When "Select this image?" is displayed, select
"Yes".
F
Select the zoom factor from the zoom setting
screen.
G
When the message "Save this image as the User's
Logo?" is displayed, select "Yes".
The image is saved. After the image has been saved, the message
"Completed." is displayed.
• Once a user's logo has been saved, the logo cannot be
q
returned to the factory default.
• Saving the user's logo may take approximately 15 seconds.
Do not use the projector or any connected equipment while it
is saving, otherwise malfunctions may occur.
87