Saving A User's Logo - Epson EB 1735W User Manual

Saving a User's Logo

You can save the image that is currently being projected as a user's
logo.
When a user's logo is saved, the previous user's logo is
q
erased.
Procedure
A
Project the image you want to use as the user's
logo, and then press the [Menu] button.
Using the remote control Using the control panel
B
Select "Extended" - "User's Logo" from the
configuration menu. s "Using the Configuration
Menu" p.38
Check the buttons you can use and the operations they perform in
the guide under the menu.
• If "User's Logo Protect" from "Password Protect" is set
q
to "On", a message is displayed and the user's logo
cannot be changed. You can make changes after setting
"User's Logo Protect" to "Off".
• If "User's Logo" is selected when Keystone, E-Zoom,
Aspect, or Progressive are being performed, the function
currently being performed is cancelled.
C
When "Choose this image as the User's Logo?" is
displayed, select "Yes".
When you press the [Enter] button on the remote control or
q
the control panel, the screen size may change according to the
signal as it changes to the resolution of the image signal. The
image is recorded and a selection marquee box is displayed.
86
p.33
s