How To Charge; The Battery Pack - Craftsman nextec 320.61325 Operator's Manual

HOW TO CHARGE THE BATTERY PACK
NOTE: This Lithium-Ion battery pack is shipped partially charged. Before using it
the first time, fully charge the battery pack.
A fully discharged battery pack will charge in about 30 minutes in a surrounding
II
communicate with the |
battery pack to evaluate the
condition of the battery pack.
6. The green light will flash
while the battery pack is
charging. After charging
is complete, the green
LED on the charger will
be on. The flickering red
light indicates a defective
battery or a bad connection
between the battery and
the charger.
7. The battery pack will fully charge if left on the charger, but it will not overcharge.
NOTE: For your convenience, the charger can operate with most generators and
inverters rated at 300 watts or higher.
temperature between 32°F (0°C) and 104°F (40°C).
1. Charge the Lithium-Ion battery pack with the correct charger.
2. Connect the charger to a power supply.
3. Align the raised ribs of the battery pack with the slot in the charger.
4. Insert the battery pack into I
the charger (Fig. 2). Fig. 2
I
5. The charger will
61325 Manual_Revised_lO 0225 Page 16