Connecting To A Desktop Macintosh; Connecting The Computer And Monitor Cables - Epson PowerLite 7700p User Manual

Connecting to a Desktop Macintosh

You can connect the projector to any desktop Macintosh. This section
includes instructions for the following:
Connecting the computer video cable and computer monitor
I
cable
Connecting the mouse cable (if you want to use your remote
I
control as a mouse)
I Connecting the audio cable (if you'll be projecting with audio)
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.

Connecting the Computer and Monitor Cables

This illustration shows the connections you'll be making. (You may
not need to use the adapters as shown.) For details, follow the steps
below.
Macintosh desktop
adapter (if needed)
Macintosh
monitor cable
computer cable
1. Disconnect the monitor cable from the video port on the back of
the Macintosh.
2. Connect one end of the computer cable to the projector's
port, as shown.
Computer 1
Macintosh
monitor
adapter (if
needed)
Appendix A: Connecting to Additional Equipment
note
Macintosh configurations
vary. See your computer
manual for the location of the
ports needed to connect your
projector. Older models may
require a Macintosh adapter
set, which you may purchase
from EPSON; see page 8.
83