Solving Problems With The Remote Control - Epson PowerLite 7700p User Manual
Epson projector user'sguide 7700p
Hide thumbs
Also See for PowerLite 7700p:
- User manual (12 pages) ,
- Specifications (2 pages) ,
- Product support bulletin (1 page)
Table of Contents
Advertisement
Power
Freeze
A/V Mute
R/C ON
on/off
E-Zoom
OFF
switch
3
Enter
Esc
Solving Problems
74
Solving Problems with the Remote
Control
The projector doesn't respond to remote control commands.
I
Make sure the remote control is turned on.
I
Make sure you are within 30 feet of the projector, and within
range of the projector's front or back sensor (approximately 30
left or right and 15
The remote control batteries may not be installed correctly or may
I
be low on power. To test the batteries, press the
The other buttons on the remote should light up temporarily. If
they don't, you need to change the batteries as described on
page 30.
I
Dim the room lights and turn off any fluorescents. Make sure the
projector is not in direct sunlight. Strong lighting, especially
fluorescent lights, may affect the projector's infrared receivers.
Turn off any nearby equipment that emits infrared energy, such
I
as a radiant room heater.
You can't control the mouse pointer with the remote
control.
Make sure the mouse cable is securely connected to both your
computer's mouse port or USB port and the projector's mouse port.
For details, see page 13 (for laptops) or Appendix A (for other
systems).
°
above or below).
°
to
light button.
Advertisement
Table of Contents
