Creating Your Own Startup Screen; Capturing The Image - Epson PowerLite 7700p User Manual

Creating Your Own Startup Screen

You can transfer any image on your computer to the projector, and
then use it as the screen displayed when the projector is not receiving a
signal. You can also set it to be displayed when you press the
button, or as a startup screen. The image can be a company
A/V Mute
logo, slogan, photograph, or any other image you want to use.

Capturing the Image

Start by displaying the image you want to use on the projector. You
can use an image from either a computer or video source such as a
VCR or digital camera. Then follow these steps to capture the image
and transfer it to the projector:
1. Press the button on the control panel or remote control.
Menu
You see the main menu.
2. Press the down arrow (control panel) or press down on the
button to highlight the
Video
User's Logo Capture
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter
3. Press to highlight User's Logo Capture and press
Enter
again to select it. You see the message shown at the right.
4. Select and press
Yes
image.
5. Use the arrow buttons on the control panel or the
on the remote control to select the area of the image you want to
use. Once you have selected the entire area, press
menu.
Capture
Execute
. A selection box displays over the
Enter
Enter
Enter
button
Enter
.
Enter
Fine-tuning the Projector
49