Connecting An Rgb Video Source - Epson PowerLite 61p User Manual

Connecting an RGB Video Source

Follow these instructions to connect the projector to a video player or
satellite receiver that has an RGB video output port using the VGA
computer cable that came with the projector.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Connect one end of the VGA computer cable to the
Computer1/Component Video1
Computer2/Component Video2
2. Connect the other end to the video port on your player.
3. To play sound through the projector, follow the instructions
beginning on page 27.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 30 for instructions.
If more than one device is connected to the projector, select
or
Computer 1 (RGB)
on which port you used. See page 32 for details.
or the
port on the projector.
as the source, depending
Computer 2 (RGB)
Setting Up the Projector
25