Replacing The Batteries - Epson PowerLite 61p User Manual

note
The remote control
automatically shuts off when
it detects a button being
pressed more than 30 seconds.
This conserves battery life. It
can be helpful, for example,
when the remote is in a
carrying case and the
button is
Power
P
accidentally pushed.
caution
When replacing batteries,
take the following
precautions:
Replace the batteries as
soon as they run out. If a
battery leaks, wipe away
battery fluid with a soft cloth.
If fluid gets on your hands,
wash them immediately.
Do not expose batteries to
heat or flame.
Dispose of used batteries
according to local regulations.
Remove the batteries if you
won't be using the remote
control for a long period of
time.
Using the Remote Control
48

Replacing the Batteries

The remote control uses two AAA alkaline batteries. Follow these
steps when you need to replace them:
1. Press in the tab to remove the battery cover.
2. Remove the old batteries, then insert the new ones as shown.
3. Replace the battery cover. (It should click into place.)