Adjustments
Arm Lock
Adjusting
Wheel
With the aml at an "'unindexed"
position
and
the miter lock applied,
the locking
action
should
feel tight and secure.
Miter/Arm
Lock Lever
Considerable
effort should
be required
to
move
the arm back towards
0 °. Its is always
possible
to force the arm because
of the
leverage
advantage
the long arm provides.
However,
the arm should
resist moving
when
a reasonable
amount
of force is
applied.
To check
tbUow these
steps:
1. Pull miter/arm
lock forward to unlock and
rotate arm to approximately
30 ° left or right.
2. Lock miter/ann
lock by pushing
handle
toward
rear of saw.
3. Apply
pressure
as shown
above.
4. If the arm moves
easily:
a. Unlock
miter lock.
b. Locate the adjusting wheel as shown.
c. Turn wheel clockwise
to tighten,
counterclockwise
to loosen.
5. Repeal steps 1, 2, 3 above and readjust as
necessary.
Arm Lock
Adjusting Wheel
19