Xerox FreeFlow Operator And Administrator Manual page 149

F r e e F l o w P r o c e s s M a n a g e r O p e r a t o r a n d A d m i n i s t r a t o r G u i d e
• 3 Up: Each page is imaged three times on one side of a sheet
of paper.
• 3 Up Flip Left: Each page is imaged three times on one side
of a sheet of paper with the left of the three imaged pages
flipped 180 degrees to appear upside down.
• 3 Up Flip Right: Each page is imaged three times on one side
of a sheet of paper with the right of the three imaged pages
flipped 180 degrees to appear upside down.
• 4 Up: Each page is imaged four times on one side of a sheet
of paper. There is no flip option for 4-Up.
• 8 Up: Each page is imaged eight times on one side of a sheet
of paper. There is no flip option for 8-Up.
• 16 Up: Each page is imaged sixteen times on one side of a
sheet of paper. There is no flip option for 16-Up.
• Custom N-Up: Allows the user to specify rows and columns in
combination with Orientation, Sides Imaged, Margins, Paper
Stock, and Autofit options. The following options are grayed
out if Custom N-Up is not selected:
– Rows (maximum of 16)
– Columns (maximum of 16)
– Pages on Sheet Side; Repeated; SequentiaI; Cut and
Stack; Alternating
• Maximum N-Up: Given an input page size, calculates how
many of those pages can be fit onto the sheet. See also
Maximum N-Up considerations
limitations.
Wo r k f l o w B u i l d e r
and Maximum N-Up
2-97