Adjusting Blade Insert - Craftsman 113.221611 Owner's Manual

ADJUSTING BLADE INSERT
1 ,, Turn saw over
2, Loosen Phillips screw in blade insert do not
remove,
3 Remove blade insert by lifting slightlyand pulling
insert toward front of saw to disengage from key
hole slot
BLADE INSERT
HEAD
SCREW
4, Tab at rear of insert should engage in saw table
firmly It may be necessary to bend tab slightly
using pliers.
\
5 Install blade insert by placing keyhole slot in
insert over screw head in saw table and pushing
insert to rear of saw table sliding tab in insert
under saw table ledge
Tighten screw