Iscsi Driver; Scsi Driver Informational Log Messages - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

ID Log message
QLSC_CollectBUVUIO: Freeing dead TRB: State
55299
0x%02X, AbortReason %d, Flags 0x%02X

iSCSI driver

Table 20 lists log messages common to both iSCSI ports, 1 (GE1) and 2 (GE2). Log messages
beginning with #0 apply to iSCSI port 1 (GE1), and log messages beginning with #1 apply to iSCSI
port 2 (GE2).
Table 20 SCSI driver Informational log messages
ID Log message
86343 #%d: QLPortUp: Set link configuration 0x%x
86347 #%d: QLDisable: Restart RISC
86349 #%d: QLEnable: Restart RISC to update EEPROM
86352 #%d: QLPortDown: Set link configuration 0x%x
86874 #%d: QLIsrDecodeMailbox: Link up
#%d: ql4xxx_offload_init: Outbound offload initialization
87305
completed
87346 #%d: QLGetFwStateCallback: link 100Mb FDX
87347 #%d: QLGetFwStateCallback: link 100Mb HDX
87348 #%d: QLGetFwStateCallback: link 1000Mb FDX
87349 #%d: QLGetFwStateCallback: link 1000Mb HDX
87350 #%d: QLGetFwStateCallback: Invalid link speed 0x%x
No. Description
TRB freed, State xx, Abort
2051
Reason d, Flags xx
No. Description
iSCSI port enabled,
327 port up 331 Restart
iSCSI processor (RISC)
Restart iSCSI processor
331
(RISC)
EEPROM updated, re-
333 start iSCSI processor
(RISC)
iSCSI port disabled,
336
port down
Link up reported by
858 iSCSI processor for
GE1 or GE 2
Not used. To be used
1289 on 6200 in outbound
offload code.
iSCSI port link-up at
1330
100Mb full-duplex
iSCSI port link-up at
1331
100Mb half-duplex
iSCSI port link-up at
1332
1000Mb full-duplex
iSCSI port link-up at
1333
1000Mb half-duplex
iSCSI port link speed
could not be determ-
1334 ined. Link speed may
be incorrectly pro-
grammed
IP Distance Gateway User Guide 133