Figure 47 Create Virtual Library Wizard window (1 1 of 12)
10.
Click Next.
Figure 48 Create Virtual Library Wizard window (12 of 12)
1 1.
Click Return.
The System tab window opens. You can now select the new library, tape drive(s), and cartridges in
the navigation tree to view their configuration information, such as their default LUN numbers.
Destroying a virtual library
NOTE:
Destroying a virtual library may create a gap in the default LUN numbering on the FC host port to
which it was mapped. If a gap is created, restart the VLS device emulations to remove the gap. See
Restarting the VLS device
Most operating systems will ignore (cannot access) any virtual devices with LUN numbers that follow a
gap in the LUN numbering on an FC host port.
80
Configuration
emulations.