4.
Current network configuration, NTP settings, and time zone settings are displayed. Modify these as
needed
(Figure
Figure 31 Set Network Configuration Wizard window
5.
Click Finish to apply the settings.
NOTE:
The system automatically reboots after any change.
Setting the user preferences
Setting the user preferences allows you to:
•
Set the frequency at which the system state is checked and the browser is refreshed
•
Add the VLS administrator's name, company, mail, and phone number, and the VLS location
to the Identity tab window
•
Set the maximum number of notification alerts to store
To set the user preferences:
1.
Open a Command View VLS session and log in as the administrator. See
View VLS session from Command View
2.
From the System tab, select Chassis in the navigation tree.
3.
Click User Preferences under Maintenance Tasks.
The User Preferences window opens
31).
(Figure
TL.
32).
Opening a Command
HP StorageWorks
65