Table of Contents
Advertisement
Figure 59 Cartridges Parameters window
CAUTION:
Be careful when moving cartridges to a library other than the Firesafe. If the total number
of cartridges for a library exceeds the number of slots available for that library, the backup
application cannot access the additional cartridges.
6.
To move one or more cartridges to a different location or to the Firesafe:
a. Select the Select box next to each cartridge that you want to edit.
b. Set the desired location in the Move selected to box.
c.
Click the Go button next to the Move selected to box.
7.
To change a cartridge's total capacity:
a. Select the Select box next to each cartridge that you want to edit.
b. Enter a new value, in GB, in the Total box.
c.
Click Update.
8.
To change a cartridges' read and write access:
a. Select the Select box next to each cartridge that you want to edit.
b. Select the desired access from the Access box.
c.
Click Update.
9.
To change the read/write access for all cartridges displayed:
a. Select the Select All box.
b. Select the read/write setting for the cartridges from the Change selected box.
c.
Click the Go button next to the Change selected box.
93
HP StorageWorks
Advertisement
Table of Contents
