Service Safety; Safety Rules For Electric Trimmers - Craftsman Weedwacker 172.74536 Operator's Manual

SERVICESAFETY
I. If any part of this trimmer is missing or should break, bend, or failin
any way; or should any electrical component fail to perform properly:
SHUT OFF the power switch and remove the trimmer plug from the power
source and have the missing, damaged or failed parts replaced BEFORE
resuming operation.
2. Tool service should be performed at a Sears Parts and Repair Center.
Service or maintenance performed by unqualified personnel could result in
a risk of injury.
3. When servicing a tool, use only identical replacement parts.
Follow instructions in the maintenance section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SAFETY RULES FOR ELECTRIC TRIMMERS
1. KNOW your electric tool. Read operator's manual carefully. Learn the
applications and limitations, as well as the specific potential hazards related
to this tool. Following this rule will reduce the risk of electric shock, fire or
serious injury.
2. DO NOT use trimmer at night. ALWAYS make sure that you have adequate lighting.
3. Use trimmer ONLY when grass and weeds are dry.
4. ALWAYS hold the trimmer by both the main handle and the auxiliary handle
for greater control and balance.
5. AVOID accidental starting. DO NOT carry a plugged in trimmer with your
finger on the switch.
6. DO NOT carry the trimmer by the cord or yank the cord to disconnect it from
the power receptacle. Keep cord away from heat, oil and sharp edges.
7. DO NOT grasp the exposed cutting line when picking up or holding the trimmer.
8. DO NOT FORCE the trimmer. Do net try to cut more than what the trimmer is
designed for. It will do a better job with less chance of injury when used at the
rate for which it is designed.
9. MAINTAIN the trimmer with care. ALWAYS inspect the extension cord and
replace it if damaged.
10. KEEP the handle dry, clean and free of oil and grease. Use a clean cloth
when cleaning. DO NOT use solvents, brake fluids, gasoline, or other
petroleum products to clean the trimmer. They can damage plastic parts.
1I. NEVER, for any reason, touch the cutting line or other moving parts during use.
12. KEEP guard in place and in good working order. Keep hands and feet away
from cutting line.
8