Specifications - Craftsman Weedwacker 172.74536 Operator's Manual

KNOW YOUR TRIMMER/EDGER cont. (Fig. 2)
This Trimmer/Edger has the following features:
1. 4.0 Amp, 8000 RPM (no-load speed) motor. Provides power for trimming
and edging in medium duty applications.
2. 180 ° Rotating Handle with Comfort Grip allows you to use the trimmer as an
edger. The comfort grip provides increased operator comfort with reduced vibration.
3. Adjustable Position Assist Handle provides added comfort, maximum control.
4. Adjustable Trimmer Head. Your trimmer has a 4-position tilting head that easily
adjusts to the right working angle for optimum operator control and comfort in
all trimming tasks, from trimming around hard-to-reach flower beds and shrubs,
to deck supports, fences and stairways.
5. Adjustable Shaft. Allows you to change the length of the shaft from 16 to 25
inches, providing a comfortable working height.
6. Edge Guide provides a cutting guide for protecting flowers and plants from
being cut by trimmer line.
7. Bump-Feed Head allows you to simply bump the trimmer head for convenient
cutting line extension.
8. Trigger Switch. Full length for easy operation.
9. Rotating Handle. Rotating handle allows you to use the trimmer as an edger
(for vertical trimming).
10. Cord Retention Hook helps keep the extension cord in place.
11. Lightweight design for easy use and handling comfort.
Cutting Swath
Speed
Line Diameter
Line Feed Mechanism
Power Head -RIt
Adjust Height of Shaft
Cord Length
Power Requirement
12 inches
8000 RPM
.065-inch dual line
Bump head
4 positions
From 16 to 25 inches
12-inch Pigtail Power cord
120-volt, 60 Hertz AC Only
11