Adjusting The Cutting Angle; The Cutting Line - Craftsman Weedwacker 172.74536 Operator's Manual

ADJUSTING THE CUTTING ANGLE (Figs. 7 and 7a)
I Z_WARNING:To avoid injury, ALWAYS turn off and disconnect the I
t
trimmer from the power outlet BEFORE installing or changing the
I
trimmer line or making any adjustments.
Your trimmer has a 4-position tilting head that easily adjusts to the right working
angle for optimum operator control and comfort. To adjust the trimmer head angle:
1. Press the black trimmer head adjustment button on the motor housing,
2. Move the trimmer head to one of four different angles and release the button.
Head will click into position. Easily readjust the angle to a more comfortable
or efficient 3osition as needed.
Fig. 7 Fig. 7a
/
,/
/
I /kWARNING:BEFORE connecting your trimmer to the power outlet, I
ALWAYS turn the switch to the "off" position. Failure to do so could
I
result in accidental start-up, which may cause serious personal injury.
THE CUTTING LINE
I AWARNING:DO NOT grasp the exposed cutting line when picking
up or holding the trimmer,
A double-wound cord of monofilament cutting line is pre-installed on the trimmer.
When the cutting line needs replacing, install a new pre-wound spool,
or refill the spool with new line (see page 15).
14