Adjusting The Auxiliary Handle; Adjusting The Height - Craftsman Weedwacker 172.74536 Operator's Manual

ADJUSTING THE AUXILIARY HANDLE
(Fig. 5)
1. The auxiliary handle comes on the shaft
of the trimmer. Before operating the
trimmer, make sure the auxiliary handle
is tightly locked into position.
2. To adjust handle, pick a comfortable
height and tighten.
3. To tighten, turn the auxiliary handle knob
clockwise to lock the handle in position.
Auxlnary
handle knob
Auxiliary
handle
Z_WARNING: To avoid injury, adjust the auxiliary handle for
maximum control and balance. DO NOT overreach when operating
the trimmer. ALWAYS KEEP proper balance for better control of the
tool in unexpected situations.
ADJUSTING THE HEIGHT (Figs. 6 and 6a)
1. To change the height of the trimmer, press down on the height adjustment
latch to release the height adjustment lock, then pull or push the shaft to
the desired height. There are four main operating positions and one storage
position.
2. Release the latch, then pull up on the shaft, making sure it locks into position.
Fig. 6
13