Printing Trim Lines; Using Cut Sheet Paper - Epson Stylus Pro 9000 Printer Manual

Printing Trim Lines

You can have trim lines printed on the right edge of your images or pages (if
you're using auto cut) or on the right and bottom edge (if you're not using
auto cut). Follow these steps:
1. Press the
SelecType
the display.
2. Press the button until
Item
3. Press the button.
+
4. Press the button to save the new setting.
Enter
5. Press the
SelecType
If you're using the RIP Station 5100 or the EPSON printer driver, you can
also specify trim lines through your print options. See the RIP Station 5100
User Guide or Appendix B or C in this manual for more information.

Using Cut Sheet Paper

You can print on many types of cut sheet paper and other media. If you're
using stock more than 0.5 mm thick, see page 1-15 for additional
instructions.
The printer accepts sheets ranging from 11 × 17 inches to 44 × 62.2 inches.
You can leave your roll paper in the printer when you print on cut sheets;
make sure it is rolled up and fastened with the roll paper belt(s), as described
on page 1-8.
1-13
button.
PRINTER SETTING MENU
PAGE LINE=OFF
appears on the display.
PAGE LINE=ON
button to exit the Printer Setting menu.
Handling Paper |
appears on
appears on the display.
1-13