Epson Stylus Pro 9000 Printer Manual page 56

Maintaining and Transporting the Printer
Following is an example of patterns #6 and #8, which print in color:
Row 4 shows the
smallest gaps and
is the best choice.
Follow these steps to complete the alignment procedure:
1. Examine pattern #1 (or the pattern you printed) and determine which
row of lines has the smallest gaps. In the two examples above, the lines in
row 4 have the smallest gaps.
2. Check the control panel display. It should show something like
indicating that row 4 is selected for pattern #1.
3. Use the + + or – – button to select the best aligned row for pattern #1. Then
press the button to register the setting. The control panel display
Enter
changes to show
#2 = 4
4. Repeat steps 2 and 3 for each pattern you printed. If you need to verify
any of the settings, press
5. After you have registered all the patterns, press the
head alignment mode and return to normal printer operation.
1
2
3
4
5
6
7
.
repeatedly to cycle through the patterns.
Enter
3-5
| 3-5
#1 = 4,
button to exit
Pause