Assembly; Tools Required For Assembly - Craftsman 536.886220 Owner's Manual

rts packed separately in carton (not shown full size)
- Ignition Keys
_ttached to engine in plastic bag)
-'7
- Mid-Crank Rod
I - container 5W30 oil
1 - Speed Contro! Rod
CAUTION: Always wear safety
lasses or eye shields while assembling
now thrower.
"OOLS REQUIRED FOR
ASSEMBLY
- Knife to cut carton and plastic ties
- 1/2 inch wrenches (or adjustable
wrenches)
._,- 9/16 inch wrenches (or adjustable
wrenches)
1 _ Pliers (to spread cotter pin)
1- Screwdriver
1 - Air pressure gauge
1 - Measuring tape or ruler
The figure below shows the snow thrower in
the shipping,carton.
The figure below shows the snow thrower
completely assembled.
References to the right or left hand side
of the snow thrower are from the viewpoint
ot the operator's position behind the unit.
er Drive Lever
Remote Chute Deflector Lever
Speed ShifterLever
rive
Lever
Assembly
CabIe
Height
Adjust
Skids
o
5