Chery SQR480ED User Manual page 62

Starting up and Operating
Button switch B Button switch A
Speed Setup
If the vehicle has reached the desired
speed, press the slide switch once
towards ―O/I‖ direction. At that time,
the cruise indicator light in the
instrument cluster will flash and at
the same time press ―+‖ or ―-― once on
the switch B to enter into cruise system.
Then the driver may remove the foot
from the accelerator pedal.
Also, driver can increase the vehicle
speed by stepping down the accelerator
pedal as driver would normally. After
the accelerator pedal is released, the
cruise control system will control the
vehicle to drive stably at the preset
speed.
If the period when the vehicle speed is
above the preset speed more than
10km/h exceeded 5 min, then the
originally preset speed will fail and the
cruise speed must be re-set.
Notice:
If the saved speed is not high enough
compared with current
conditions, then the cruise speed
should be re-set.
- 56 -
Deceleration Setup
It can change the speed setting by
pressing the button switch B.
Each press of button B towards
"-‖ direction will decrease the cruise
speed by 1.5 km/h.
certain period, the cruise system will
decrease the cruise speed by reducing
traffic
the accelerator opening automatically.
After the button B is released, the
cruise speed setting will be saved.
If sustained for