Chery SQR480ED User Manual page 106

3. After adjustment, press A-M of key
4 until it is in operational mode.
Z-enhancer setting
This device is equipped with 3 kinds
tone effects stored in the memory,
select whichever you like.
！Notice:
Factory default setting is ―Z-EHCR
OFF‖.
Every time you press Z-EHCR of key
7, tone effect changes according to the
following orders:
―Z-ENHANCER
1‖→―Z-ENHANCER
→―Z-ENHANCER
→―Z-ENHANCER
→―Z-ENHANCER 1‖......
Z-ENHANCER 1：Bass enhanced
Z-ENHANCER
enhanced
Z-ENHANCER 3：Both enhanced
Z-ENHANCER OFF：No sound effect
Change display
Press BAND of key 6, at the same time,
press DISP of key 14,if you want to
enter clock display mode.
Main display→Clock display→Main
display
Clock setting
2‖
Press BAND of key 6, at the same time,
3‖
press DISP of key 14 to enter clock
- 100 -
Audio System for Songs (Optional)
OFF‖
2 ： High
pitch
display mode.
1. Press BAND of key 6, at the same
time, press DISP of key 14 for at
least 2 seconds, clock editing
mode is started. It will flicker for
you to edit.
2. Use up (hour) and down (minute)
of key 1, if you want to move
between hour and minute.
3. Press BAND of key 6, if you
want to store clock setting.
！Notice
The clock setting will be cancelled out
if you select other operation mode,
before you complete
above-mentioned operation; the clock
will turn to 1:00, if you take the battery
out for check and repair, at this time,
please set the clock once again.
the