Attach two 1/4-20x5/8" screws, 7ram lock washers and 7ram flat washers on right side of fire box, shown A, Only tighten
one-fourth of screw length, so that mounting panel of shelf can slide between fire box and washers in next step. Do not
fully tighten the screws.
Next, insert the keyhole slots on mounting panel of burner shelf over the two screws and washers. Make sure the tabs on
shelf mounting panel insert into cut-outs on fire box, shown B. Fully tighten the two screws.
1/4.20x518" S crew
lockwasher
_
7ram Fiatwasher
Qty.2
_
Qty.2
22.464224010