Table of Contents
Advertisement
Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and
facing the front. Secure using two 1t4-20xlt/2 ' screws, 7ram lock washers, and 7ram flat washers on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
On back of grill, place upper back panel between side panels and
above lower back panel. Secure upper back panel, in lower holes,
using one 114-20xlt/2'' screw, 7ram lock washer, and 7ram flat
washer on each side. Do not fully tighten screws until side shelf
installation is complete in later steps.
1/4-20x11/2 '' 7ram lock
7ramflat
screw
washer
washer
4p.------- Rearupper panel
80006580
16 • 463268107
Advertisement
Table of Contents
