Table of Contents
Advertisement
.
Attach the doorbracketto the lower holes in the front legs
withthe end tabspointing upwardand theflangeto the rear,
pointing downward. U se 2 of the 114xl/2" Phillips-head
screws, Do notfull,] tighten.See Fig. 4,
.
Place doorsintothe hingeholesof the bottomshelf and
doorbracket.Push doorbracketdownuntildoorsare
secure and can openand closefreely. Do not fully tighten
doorbracketscrews, See Fig. 4.
10, Removeprotective filmfrom doors.Install d oor handlesto
doorsusing4 of the 3/16x3/8" Phillips-headscrews. See
Fig. 4.
11. Attachthe 4 side shelf brackets to the topsof the cartlegs
using8 of the 1/4xl/2" Phillips-head screws.
IMPORTANT: Bracket with cut.out installs on front left
leg. Be sure the flat side of each bracket faces outward,
Fullytighten.See Fig. 4,
12, Place the sideburner shelf overthe leftbrackets and cross
brace.Be sure ignitor wire is hangingloose.Be sure the
inside shelf holesalignwith crossbrace holes, Secure
shelf firmlyto theends ofthe brackets using2 ofthe
1/4xl/2" Phillips-head screws. Repeat this procedure for
the side shelf on the rightside of thecart. See Fig. 4.
FIGURE 4
Sideburner
Align
Side
shelf
cut-out
Lower
outward
bracket ;/
.,/
bole
/
Handle
/
/
film
Hinge'7_i
13. Attachmatchlighting sflck
and chainto the rightrear
leg, belowshelf bracket.
usingone 3/16"xl/2",
self-tapping, Phillips-head
screw, See Fig. 5,
FIGURE 5
j
Match
lighting
stick
To reducethe weightof the grillhead,openthe grilllidand
remove the packed components. T his step requires 2 people
to lift and position the grill head onto the cart.
14. HINT: Slide grillhead intocartfrom the front. Use care to
avoid scratchingtops of side shelves, Alignthe 2 holes
beneaththe hangledgeon each side of the grillhead with
the 2 holes in the side shelf and crossbraceon the cart.
Raisethe grilllidand insert 4 ofthe 1/4xl/2" Phillips-head
screws. Beneaththe side shelves, add 1/4'_nuts, Do not
fully tighten.See Fig. 6.
15. Attach heat indicator t o grilllidusingnutprovided. M ake
sure graphicson heat indicator a re properly orientedbefore
tightening nut. See Fig. 6.
,,,----,.
!
-,,,
FIGURE 6
!""
/
/
/
Grill
head,
ledge
;
Hang
i
ledges
i
rest on
/
4632215 • 7
Advertisement
Table of Contents
