Xerox DocuPrint 180 NPS Troubleshooting Manual page 14

FAULT MASKING
2-2
Figure 2-2. Fault List screen
The Fault List screen displays any outstanding fault codes and
shows a mimic of the printer; the area containing the masked fault is
highlighted in light yellow. For greatest printer productivity, clear any
masked faults at your earliest opportunity.
When the printer stops because of a fault, display the Fault List
screen after clearing the fault to see if there are any masked faults.
Clear these masked faults before continuing with the print job.
When there is a fault that cannot be masked and therefore causes
the printer to stop, the Fault icon (a dark yellow triangle with an
exclamation point inside) appears on the printer console and the
Attention light flashes. The Fault screen appears on the printer
console, highlighting (in dark yellow) the area(s) of the printer
containing the fault and giving instructions for clearing the fault.
If a fault exists in the system at the time that a masked fault occurs,
the printer console displays only the Fault icon. The remaining
masked fault condition messages still display in the message area of
the printer console.
XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE