Accessing Protected Mode - Xerox Phaser 6250 Setting Instructions Manual

Using CentreWare IS
To select Intelligent Ready mode or to schedule warmup/standby settings:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Click Warmup on the left sidebar.
5.
Click the Warmup Mode drop-down list and select Intelligent Ready, Scheduled, or Job
Activated.
6.
If you select Scheduled in Step 5, make selections for each day's warmup setting and
standby setting.
7.
Click Save Changes at the bottom of the screen.
Note
Although the front panel selections only allow you to turn Intelligent Ready Mode on or
off, CentreWare IS allows you to specify particular printer Warmup Modes and settings.

Accessing Protected Mode

Turn on Protected Mode from the front panel to prevent users from changing
printer settings that may impact the jobs of other users. Users can select
printing features, such as color corrections, through the printer drivers. Users
can access general menus that can improve the print quality of their jobs.
These menus direct them to user features, while locking the menus and items
in menus that the system administrator uses to manage the printer.
Using CentreWare IS
To enter or exit Protected Mode:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Click the General folder on the left sidebar, then click Printer Defaults.
5.
Click the Front Panel Menu drop-down list, then select On or Off.
■ Select Off to have all menus available.
■ Select On to lock all menu items that change printer setup values.
6.
Click Save Changes at the bottom of the page.
Phaser® 6250 Color Laser Printer
1-16
Printer Settings