Table of Contents
Advertisement
Additional Timer Recording Operations
Program
Review
/
r
Program
1/_o/record:
_,
Month
3/fl3ay 8
Start/lz00AM/Stop
2:30AM
Chaflnel
1 l/Speed
SP
Re?°rd:?nce__
___ _ _ _
-__ .'_...
) 1- ress
to see next program
or _
Press '0' key to
erase this program
Note: To quit press QUIT key
Automatic
Tape Switching
If you are using Timer
Recording
to record
a
program
at SP (Standard
Play) speed,
and there
is not enough
tape to complete
the recording,
the VCR will automatically
switch to EP (Ex-
tended
Play) speed. There
will be some distor-
tion in picture
and sound at that point on the
tape. The VCR will switch to EP Speed when
there would be 10 minutes
of tape left at SP
speed, giving you 30 minutes
of tape left at EP
speed.
Tuning Band
Channel -- will be selected automatically if
you specified TV in the Tuning Features,
Tuning Band submenu.
CATV -- will be selected automatically
if you
specified CATV in the Tuning Features,
Tuning Band submenu before you entered
the Timer program.
Aux Input -- must be specified to record FM
radio broadcasts or to use a surveillance
camera connected to the VIDEO/AUDIO
input jacks on the back of the VCR.
Recording
Speed
SP -- Standard
Play is the best for video
reproduction.
LP -- Long Play will extend the recording
time available
on the tape.
EP -- Extended
Play will triple the recording
time over Standard
Play.
Recording Selection
Once -- will record a broadcast one time.
Weekly -- will record a broadcast
one time
each week.
Daily -- will record
one broadcast,
one time
each day, Monday
through
Friday.
The VCR Timer
automatically
sorts through
the recording
information
and sets up the
broadcasts
based on starting
times.
Note: If recording
times overlap, the on-
screen menu system alerts you to that fact as
you are programming
the VCR for recording.
2612-0
9--2
Advertisement
Table of Contents
