Captions; Audio - Zenith Sentry 2 Operating Manual & Warranty

SETUP MENU
CAPTIONS
Purpose
Displays closed captions (CC) or intormational text when
available on the selected channel.
SETUP MENU
AUTO PROGRAM
CH. ADD/DEL
TUNING BAND
AUTO TUNING
CLOCK SET
• "_ CAPTIONS
AUDIO
CAPTION 1
Selecting Captions
To Use CAPTIONS
Press ADJUST (ADJ) Left/Right to select desired mode of op-
eration. Five different selections can be made: OFF, CAP-
TION 1, CAPTION 2, TEXT 1 or TEXT 2.
At the time of this writing, very little appears in any selection
except CAPTION 1. Therefore you should select CAPTION 1
and leave it in that selection unless you know there is some-
thing you want to see in one of the other selections. Once you
make a selection, that selection is remembered until you
change it.
i Hellol Are you !
out there? T
Typical Captions Display
Captions may be shown any-
where on the screen.
&
ee speclol newscos
Z
Typical Text Display
Fixed size text window fills
lower half of screen. May be
all black when no information
is shown.
AUDIO
Purpose
Determines whether your TV is operating in STEREO mode
or MONO mode.
SETUP MENU
AUTO PROGRAM
CH. ADD/DEL
TUNING BAND
AUTO TUNING
CLOCK SET
CAPTIONS
"> AUDIO STEREO
Selecting Audio
To Use AUDIO
Press ADJUST (ADJ) Left/Right to select one of the follow-
ing options:
STEREO: Directs the sound to the left and right speakers as
supplied by the program source (broadcast TV, VCR, etc.).
MONO: Directs the same sound to both the left and right
speakers even of the source being received is in stereo.
We recommend that you use the STEREO option. The TV
will switch automatically between the STEREO and MONO
modes dependent on the signal being received.
When STEREO is selected but is not being received on the
channel, a message appears stating that "THIS PROGRAM 1S
NOT 1N STEREO."
The Channel/Time display shows whether the current program
is in STEREO or MONO.
2733-0 7 _ 3