Clock Set; Captions - Zenith SENTRY 2 SLS9550S Operating Manual & Warranty

Sentry 2 series monaural color tv with remote control and closed captions
Table of Contents

Advertisement

SETUP MENU
CLOCK
SET
Purpose
Sets the clock in the TV to the correct time.
After the time has been set, the current time will appear on
the Channel/Time
display whenever the TV is turned on,
the channel is changed, or ENTER (ENT) is pressed.
Power Failure Note: The time will have to be reset if power
to the TV Lsinterrupted.
SEIUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. t.AB:E LS
TUNING BAND
AUTO FINE TUNE
CLOCK
SET
CAP11ONS
CH. BACKGROUND
Selecting Clock Set
To Use CLOCK SET from Remote Control
1. CLOCK
SET should be selected
if you followed
the
"Basic Menu
Operation"
given in tile "On-Screen
Menus"
section."
2. Use the numbered
buttons
on the remote
control to
enter the current
time. Press ENTER
(ENT) to start
the clock.
To
For example,
to set the clock to 12:343, press 1, then
2, then 3, then 0; and then press ENTER
(ENT).
If
you enter an invalid time, such as 14:35 or 2:80, the
time will disappear
and you can enter another
time.
Use CLOCK SET from Control Panel
1. CLOCK
SET display
should be shown on the TV if
you followed
the "Basic Menu Operation"
given in
the "On-Screen
Menus"' section.
2. Use ADJUST
(ADJ)
Left/Right
to set the time, and
then press ENTER
(ENT)
to start tlhe clock.
CAPTIONS
Purpose
Displays closed captions (CC) or informational
text when
available on the selected channel.
To Access CAPTIONS Indirectly (All Models)
1. CAPTIONS
should
be selected
if you followed
the
"Basic
Menu Operation"
given in the "On-Screen
Menus"
section.
2. One
of five different
selections
is shown:
OFF,
CAPTION
1, CAPTION
2, TEXT 1 and TEXT 2.
3. Press ADJUST
(ADJ)
Left/Right
to select
desired
mode of operation.
4. The display
disappears
from the screen
automat-
ically ifi about 10 seconds,
or you may press ENTER
(ENT)
to remove
the display immediately.
To Access CAPTIONS Directly (Select Models)
1. Press CAPTIONS
or CC/QUIT
on the :remote con-
trol to select CAPTIONS.
One of fiw_ different
selec-
tions
is shown:
OFF, CAPTION
1, CAPTION
2,
TEXT
1 and TEXT 2.
2. Press ADJUST
(ADJ)
Left/Right
to select
desired
mode of operation.
3. The display
disappears
from the screen
automat-
ically in about 10 seconds,
or you ma:y press ENTER
(ENT)
to remove
the display
immediately.
(continued
on nextpage)
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK
SET
CAP_ONS
CH. BACKGROUND
OFF
Selecting Setup Menu
and Captions Option
2s9_o
7 -- 4

Advertisement

Table of Contents
loading

Table of Contents