Vcr Operations - Zenith Sentry 2 Operating Manual & Warranty

_=
REMOTE CONTROL MODEL MBR3420
VCR OPERATIONS
The following functions and operations apply to Zenith VCR
models built after 1988. The remote control must be in the
VCR mode to operate your VCR.
The remote control supplied with your VCR may have keys
not duplicated on the new remote. If these functions are de-
sired, the original remote control will have to be used.
MODE
t
Point toward your VCR.
Used to select the VCR mode of
operation.
VCR
Lights when VCR mode of operation
is selected.
MENU, SELECT, ADJUST and QUIT
Used with the on-screen menus and pro-
gramming options of the VCR. See VCR
operating guide for details
Numbered Buttons
Used to select a TV channel through the
VCR. Also, used to set the timer in the
VCR, and to enter programming
information.
ENTER
Used with the numbered buttons to
select a "IV channel through the VCR.
AM/PM
Used to set timer during programming
MEMORY
Used to activate the VCR MEMORY fea-
ture. See VCR operating guide for details.
RECORD, STOP, PAUSE, SEARCH,
REW, PLAY and F FWD
Used for tape recording and playback
functions. See the VCR operating guide
SELECT QUIT FLASHBK
®©®
® ® ®
_c_ C_D CZD
,._0RD STOP PAUSE
REW PLAY F FWD TV/VCR
VCR Operations
for details.
OFF/ON
Used to turn VCR ON or OH:.
FLASHBK (Flashback)
Used during VCR playback to view the
/ channel tuned by the VCR.
CHANNEL Up/Down
Used to sequence through channels on the
VCR.
TIMER
Used to activate TIME RECORD on
some VCRs.
J
TVNCR
Used to select the source of the programs
seen on the TV. Switches the VCR be-
tween TV mode and VCR mode. TV
Mode: channels are selected through the
TV. VCR Mode: channels or tape opera-
tion are selected through the VCR.
2733-0
5 m3