Remote Control Model Mbr3420; Introduction; Choosing Operating Mode - Zenith Sentry 2 Operating Manual & Warranty

REMOTE CONTROL MODEL MBR3420
INTRODUCTION
The multi-brand remote control supplied with your new
Zenith TV allows you to operate most models of infra-red (IR)
remote-controlled TVs, VCRs, and cable-TV decoders, even if
they are all different brands.
Your multi-brand remote has already been programmed to op-
erate your Zenith TV, a Zenith cable-TV decoder and a Zenith
VHS VCR. It must be programmed to operate other brands of
equipment. Refer to the "Programming Brand Codes" section
for more information.
CHOOSING OPERATING MODE
To use the remote to operate your TV, a cable-TV decoder or
a VCR, you must first choose the mode of operation of the re-
mote control. To select the mode of operation, press MODE re-
peatedly until the corresponding indicator lights.
Some controls on the remote will always operate a particular
appliance. For example, VOLUME always operates the TV
and PLAY always operates the VCR. The functions of some
controls depends on the selected operating mode of the remote.
Point toward unit
to be controlled
Operating MODE button
and indicators
Menu operations on TV
and some VCRs
Numbered buttons for
channel selection and
other uses
LEARN button for user pro-
grammed brand codes
NOTE: See following pages
for operating instructions.
r_-i r¢-_--i
ADJ, i']
SELECT QUIT
©®®
®®®
®®®
®( E,,E, )
(2253(223(2223
LEARN A B
MEMORY TIMER
RECORD STOP PAUSE
REW PLAY F FWD
OFF ON
0
0
SOURCE
©
FLASHBK
N]
CHANNEL
VOLUME
CZD
MUTE
CZD
s_
CZ)
SEARCH
TV/VCR
i
MBR3420
Controlled devicc OFF/ON
Special features on TV and
some VCRs
CHANNEL Up/Down for TVs,
VCRs and cable
VOLUME Up/Down for TV
Special features on some
TVs and some VCRs