Playback - Zenith SRV1300S Operating Manual & Warranty

PLAYBACK
Power must be turned on.
Insert a cassette into the cas-
sette compartment.
NOTE: If the erase-protec-
tion tab has been removed,
the TV/VCR will start play-
back automatically.
If playback does not begin
automatically, press PLAY
button.
Press STOP button when
playback is completed.
PLAY Ib
s_oP
VISUAL SEARCH (SP/LP/SLP MODE)
You may view a video tape at a high speed in either a
forward or reverse direction. This feature is useful in
finding or skipping over a particular scene on a tape.
Forward Direction:
When in the Play mode, press F.FWD button to view
the tape at a fast speed in the forward direction. The
sound will be muted.
Reverse Direction:
To view the tape at a fast speed in the reverse direc-
tion, press REW button. The sound will be muted.
Press PLAY button to return to normal playback.
NOTE: The picture will not be as good as in normal
playback during Visual Search.
SUPER HIGH SPEED SEARCH
(LP/SLP MODE)
For Visual Search in super high speed:
1) Press either F.FWD or REW button while the unit is
in the Play mode.
2) Release button.
3) Depress it again. The unit will now search in supcr
high speed.
Press PLAY button to return to normal playback.
NOTE: Tapes recorded in the SP or LP mode will dis-
play a noise bar on the TV/VCR screen and the picture
may revert to Black and White. This is normal.
STILL PICTURE DURING PLAYBACK
If you press PAUSE/STILL button during the Play
mode, the picture will "freeze" on the TV/VCR screen.
You may use this feature to study details of a particular
scene. (Only tapes recorded in the SLP mode will show
the least amount of lines.)
Press PLAY button to continue playback.
NOTE: The TV/VCR will automatically switch to the
Stop mode, if it is left in the Pause/Still mode for more
than five minutes.
NOISE CANCELLING
If you use the PAUSE/STILL button to freeze the pic-
ture during playback with tapes recorded in the SLP
mode, usually there will be video "noise bars" on the
TV/VCR screen.
This is normal, however, this TV/VCR has a special
feature that allows you to reposition or reduce the lines.
Each time you press PAUSE/STILL button the lines
will change position on the TV/VCR screen. This en-
ables you to see the picture in its entirety without dis-
tracting noise lines.
If the tape was originally recorded in the SP or LP mode,
the still picture may, in addition to the "noise bars",
revert to black and white. This is normal.
- 20 -
EN
_ "_""_" " _""_"5D05