Vcr Operations - Zenith PV4663RK Operation Manual & Warranty

REMOTE CONTROL MODEL MBR3430
VCR OPERATIONS
The following functions and operations apply to Zenith VCR
models built after 1988. The remote control must be in the
VCR mode to operate your VCR.
The remote control supplied with your VCR may have keys
not duplicated on the new remote. If these functions are
desired, the original remote control will have to be used.
MODE
Used to select the VCR mode of
operation.
VCR
Lights when VCR mode of
operation is selected.
MENU, SELECT, ADJUST
and QUIT
Used with on-screen menus and
programming options of the VCR.
See VCR operating guide for details.
Numbered Buttons
Used to select a TV channel through
the VCR. Also, used to set the
timer in the VCR, and to enter
programming information.
ENTER
Used with the numbered buttons to
select a TV channel through the VCR.
AM/PM
Used to set timer during
programming.
Point toward your VCR.
,0J i f3A0J
_SEL_CT_ MENU
@
QUIT
®®®
®®®
®®®
LEARN
SOURCE
CF
FLASHBK
CHANNEL
VOLUME
CD C:_
PIP
SWAP TIMER SEQ
C=) Cl_ (312> C=)
RECORD STOP PAUSE SEARCH
REW PLAY F FWD TVIVCR
OFF/ON
j Used to turn VCR ON or Ol:l,.
FLASHBK (Flashback)
Used during VCR playback to
view the channel tuned by the
VCR.
CHANNEL Up/Down
/ Used to sequence through channels
on the VCR.
TIMER
Activates TIME RECORD on
some VCRs. See the VCR
operating guide for details.
TV/VCR
Used to select the source of the
programs seen on the TV. Switches
the VCR between TV mode and
VCR mode.
TV Mode: Channels are selected
through the TV.
VCR Mode: Channels or tape
operation are selected through the
VCR.
RECORD, STOP, PAUSE,
SEARCH, REW, PLAY and
F FWD
Used for tape recording and
playback functions. See the VCR
operating guide for details.
_736-o 4--3